Manual

LTX Tractors
114
Belt control: tensioner pulleys
NOTE: The V-pulley can be removed from below
using a 1/2” wrench, with no disassembly
beyond removing the cutting deck.
See Figure 6.48.
NOTE: Confirm that the parking brake is released
before starting work.
1. Remove the mowing deck.
2. Remove the fenders, as described in the body pan-
els chapter of this manual.
3. Disconnect the rod that joins the arm at the left side
of the clutch/brake shaft to the drive belt tensioner
pulley bracket.
See Figure 6.49.
• Remove and discard the cotter pin to discon-
nect the rod.
4. Disconnect the light extension spring that returns
the bracket and pulley to the relaxed position when
the drive pedal is released.
See Figure 6.50.
Figure 6.48
V-pulley
Figure 6.49
Cotter pin Rod
Figure 6.50
Return spring