MSDS

SAFETYDATASHEET–ARNOLD PREMIUM 4CYCLE ENGINE OIL
Page 3 of 7
Skin: Wash skin with soap and warm water. Wash clothing before re‐use.
Eye: If splashed into eyes flush eyes with clear water for five (5) minutes.
Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a poison
center/doctor if you feel unwell
Ingestion: If ingested, do not induce vomiting. Call a physician.
4. FIREFIGHTINGMEASURES
4.1. FlashPoint:405F (207C)
4.2. ProtectiveEquipment/FireFightingInstructions:
4.2.1.
For fires involving this material, do not enter any enclosed or confined fire space without proper
protective equipment, including self‐contained breathing apparatus.
4.3. ExtinguishingMedia:
4.3.1. Use water fog, foam, dry chemical or carbon dioxide (CO
2
) to extinguish flames.
4.4. SpecialFirefightingProcedures:
4.4.1. Cool exposed containers with water spray.
4.5. UnusualFireandExplosionHazards:
4.5.1. Pressure increase in over heated closed containers. Cool containers with water spray.
5. ACCIDENTALRELEASEMEASURES
5.1. SpillProcedures:
5.1.1. Remove ignition sources. Recover Liquid. Add absorbent to spill area. Ventilate confined spaces. Advise
authorities if product enters sewers, etc.
5.2. WasteDisposal:
5.2.1. Assure conformity with applicable disposal regulations. Dispose of absorbed material at approved waste
site
5.3. PrecautionaryMeasures:
5.3.1. Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.
5.3.2. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.
6. HANDLINGANDSTORAGE
6.1. HANDLING
6.1.1.
Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers