Manual

Transmission Removal
21
Transmission removal
1. Remove the belts by following the procedures
described in Chapter 2: Belts.
2. Remove the engine by following the steps described
in Chapter 4: Engine Removal.
3. Loosen the forward drive cable pulley, using a 3/8”
wrench, and slide the cable off of the pulley.
See Figure 5.1.
4. Unhook the cable. See Figure 5.2.
Figure 5.1
Loosen screw and slide
cable off of the pulley
Figure 5.2
Unhook the cable
CHAPTER 5: TRANSMISSION REMOVAL