Use and Care Manual

Handle
Remove the top two bolts and flange lock nuts from the 
handle mounting brackets, but do not remove the bottom

2.
mounting brackets.
Line up the holes in the handle with the holes in the 
bracket and secure it with hardware previously removed.
Clutch Cable
Attach the clutch cable to the handle as follows: (be careful not
to kink the cable)
Remove the threaded eyebolt and nut from the cable end.
Route the clutch cable to the right side of the handle 2.
mounting brackets and underneath the handle.


Remove the slot head screw, nut, and two flat washers from 4.





Bracket



















8 se c t i O n 3— as s e M b l y & se t -up