User Manual
EN - 11
6. CONTROLS
6.1 KEY IGNITION SWITCH
6.A
1.
No function can be activated.
2. Key fully inserted.
6.2 DRIVE PEDAL
The drive pedal (Fig. 6.A.) activates
1.
Increasing the pressure on the
2.
gear. Reducing the pressure on
3. Parking:
serves to decelerate and
until the drive pedal is
once again pressed.
NOTE
operator leaves the seat.
6.3 TRANSMISSION ENGAGEMENT
lever (
Fig. 6.E
1. () into
the horizontal position (A).
.
2. Transmission disengaged:
the lever (
The
.
WARNING
on a level surface.
SAFETY INSTRUCTION
6.4 CUTTING HEIGHT
cutting heights
repositioned in one of the stop notches.
6.5 EMERGENCY BUTTON
(Fig. 6.B)
1.
2.
it and restore all functions. To
starting procedure (par.7.4).
NOTE
NOTICE