User Manual
EN - 3
Work area safety
a) Keep the work area clean and
well illuminated. Untidy or dark
areas may cause accidents.
b)
atmospheres, such as in the presence
powder. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders
well away while using power tools.
Distractions can cause you to lose control.
Electrical safety
a) The battery charging cable plug
must match the outlet. Never
Unmodied plugs and matching outlets
will reduce the risk of electric shocks.
b)
grounded surfaces, such as pipes,
radiators, cookers and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to
Water
entering a power tool will increase
the risk of electrical shock.
d)
the plug from the socket. Keep the
solvents, sharp objects, sharp edges or
Damaged or entangled
cords increase the risk of electric shocks.
e) Do not use the cable improperly.
Damaged or entangled
cords increase the risk of electric shocks.
f) When using the power tool
outdoors, use an extension cable
suitable for outdoor use. Using an
extension cable suitable for outdoor
use reduces the risk of electric shock.
g) If using a power tool in a humid
a power outlet protected by a residual
Using an RCD
reduces the risk of electric shock.
h) Only connect the battery charger to
as indicated on the name plate.
DANGER
•
the electrical cables.
•
•
•
• Incorrect connection can cause
short circuits and serious personal
•
the supply of electrical power
during charging operations:
•
•
•
a) Stay alert, check what you are doing
and use common sense when using
a power tool. Do not use the power
tool when you are tired or under
medicines. A moment of inattention
while operating a power tool may
result in serious personal injury.
b)
Always wear eye protection.
Using protective equipment such
as a dust mask, non-slip safety
shoes, hard hat or hearing protection
helps prevent personal injuries.