Manual

Cub Cadet Commercial M60 Tank - 2002 and prior years
10
5. Lift the rear of the engine slightly and remove the
electric PTO clutch from the engine crankshaft.
See Figure 5.
6. Inspect and test the electric PTO clutch.
7. Install the electric PTO clutch in the reverse
order above.
Electric PTO Clutch Specifications
• Ogura part #520038
• Bore of 1-1/8", keyway for 1/4"x 1/4" square key
• Forged steel rotor
• E-coated metal parts
• Epoxy coated coil
• Sealed bearings with high temperature, long life
grease
• Static torque rating of 110 lb.-ft.
• Minimum "pull-in" voltage is 8 VDC
• Consumption of 50 watts (6 amps) at 12 VDC
• Coil resistance is 3 to 4 ohms at 70 F.
• Air gap (re-setting) between 0.013" (minimum)
and 0.015"
Figure 5
Electric PTO Clutch