Operator`s manual

4. 
surface. See Fig. 6-2.
5. Turn the water on.
6. 
the engine and place the throttle lever in the FAST (rabbit)
position.
7. 
8. 
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
9. 
position.
 

 Turn the water off and detach the hose coupler from the



running for a minimum of two minutes, allowing the underside
of the cutting deck to thoroughly dry.
Lubrication
WARNING! Before lubricating, repairing, or

brake, stop engine and remove key to prevent
unintended starting.
Front Wheels
Each of the front wheel axles and rims is equipped with a

grease applied with a grease gun after every 25 hours of tractor
operation.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Deck Wheels

a grease fitting. Lubricate with a No. 2 multi-purpose grease
applied with a grease gun after every 25 hours of tractor
operation.
Figure 6-2
Figure 6-3
21Section 6 — Maintenance & adjuStMentS