Replacement Part List

28
LGT 1050 Labels
777I23490
777I22265
777X45788
777I23133
777I23294
777S35012
777S30503
777I23293
777D16885
777D16886
777D16533
777D152
67
77D9 15268
777S33233
777D15400
777X45529
777D16298
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2012 model year.
EVP Family: CMTDPNHEQNC1
EMISSION CONTROL INFORMATION
X45529
777D15338
ROTATING BLADES CAUSE
SERIOUS INJURY OR DEATH
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE
AROUND
•
NEVER CARRY CHILDREN EVEN WITH BLADE(S) OFF.
• LOOK DOWN AND BEHIND BEFORE AND WHILE
BACKING.
• MOWING IN REVERSE IS NOT RECOMMENDED.
DANGER
TO START
OPERATING MODES
REVERSE CAUTION MODE
1. TURN KEY TO REVERSE CAUTION MODE POSITION.
2. DEPRESS REVERSE PUSH BUTTON. (RED INDICATOR LIGHT “ON”)
WHEN RED LIGHT IS “ON” MACHINE CAN BE OPERATED IN REVERSE
WITH
MOWER BLADES ENGAGED.
IMPORTANT: MOWING IN REVERSE IS NOT RECOMMENDED.
3. AFTER RESUMING FORWARD OPERATION, RETURN KEY TO
“NORMAL MOWING” POSITION.
NOTE:
IN BOTH MODES, WHEN OPERATOR LEAVES SEAT, ENGINE WILL
STOP UNLESS PARKING BRAKE IS SET AND BLADES ARE DISENGAGED.
NORMAL MOWING
YOU MUST DISENGAGE BLADES/PTO,
(POWER TAKE OFF)
BEFORE
T
RAVELING IN REVERSE.
DEPRESS
BRAKE PEDAL,
PUSH PARKING
BRAKE LEVER
DOWN AND
RELEASE PEDAL
TO LOCK
DEPRESS SPEED
CONTROL PEDAL
TO DESIRED SPEED.
PUSH CRUISE
CONTROL LEVER
DOWN AND RELEASE
PEDAL. PRESS
BRAKE OR
SPEED CONTROL
TO RELEASE
PARKING
BRAKE
CRUISE
CONTROL
(LOCATED ON DRIVERS RIGHT)
LOWER DASH
1. DISENGAGE BLADES/PTO, (POWER TAKE OFF)
2. ENGAGE THE TRACTOR’S PARKING BRAKE.
3. ACTIVATE THE CHOKE CONTROL.
4. TURN KEY TO START ENGINE. AFTER START RELEASE KEY & DEACTIVATE CHOKE
BY PLACING THROTTLE TO FAST
“RABBIT” POSITION.
For A List Of
Optional
Attachments,
Please Refer To
Your Operators
Manual.
Operation Of This Equipment May Create Sparks That Can Start
Fires Around Dry Vegetation. A Spark Arrestor May Be
Required. The Operator Should Contact Local Fire Agencies For
Laws Or Regulations Relating To Fire Prevention Requirements.
777I23132
LGT 1050
HYDROSTATIC V-TWIN •
LGT 1050
HYDROSTATIC
V-TWIN •
•KEEP HANDS AND FEET AWAY FROM ROTATING PARTS.
•REMOVE OBJECTS THAT CAN BE THROWN BY THE BLADE IN ANY
DIRECTION. WEAR SAFETY GLASSES.
•DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
NEVER CARRY CHILDREN EVEN WITH BLADES OFF.
•USE EXTRA CAUTION ON SLOPES. DO NOT MOW SLOPES GREATER
THAN 15 MOW UP AND DOWN NOT ACROSS. AVOID SUDDEN TURNS, USE LOW SPEED.
READ OPERATOR'S MANUAL. KEEP SAFETY DEVICES IN PLACE AND WORKING.
AVOID SERIOUS INJURY OR DEATH
S35012
777X46245
MTD CONSUMER GROUP INC.
This equipment meets U.S. EPA EVP
regulations for 2013 model year.
EVP Family: DMTDPNHEQRP1
EMISSION CONTROL INFORMATION
X46245
®
Oil Filter KH-12-050-01-S
Air Filter W/ Pre-Cleaner KH-32-883-03-S1
Spark Plug 759-3336
Fuel Filter KH-25-050-22-S1
Oil Capacity 57.6 oz
Blades 942-04053C (3)
Lower Drive Belt 954-04207
Engine To Deck Belt 954-04077
Deck Spindles
918-04125B
Ignition Key 925-2054A
Solenoid 725-04439
Use only Cub Cadet genuine factory parts
www.cubcadet.com
MODEL
LGT 1050
REPLACEMENT PARTS