Full Product Manual

Maintenance & Troubleshooting
5
7
Maintenance
WARNING! Before performing
any maintenance or repairs
always stop engine.
Cleaning the Blower
Any fuel or oil spilled on the machine should
be wiped off promptly. Do NOT allow debris
to accumulate around the cooling fins of the
engine, the fan intake area or on any other part
of the machine.
WARNING! If the engine has
been recently run, the engine,
muffler and surrounding metal
surfaces will be hot and can
cause burns to the skin.
Exercise caution to avoid burns.
Lubrication
WARNING! Before lubricating,
repairing, or inspecting always
stop engine.
Wheels
Lubricate the rear and front axles with spray
lubricant once a season.
Problem Cause Remedy
Excessive vibration or noise 1. Loose parts.
2. Damaged impeller.
3. Debris in housing
1. Tighten all fasteners.
2. Contact an authorized Service Dealer.
3. Contact an authorized Service Dealer.
Engine
Refer to the Engine Operator’s Manual for
all engine maintenance procedures and
instructions.
NOTE: Maintenance, repair, or replacement
of the emission control devices and systems
which are being done at owner’s expense may
be performed by any qualified engine repair
establishment or individual.
Troubleshooting
Replacement Parts
6
Component Part Number and Description
634-04368 Front Wheel, 8.0 x 3.0
941-0706 Flange Bearing, .635
734-04279 Rear Wheel, 12 x 3
631-04253 Discharge Chute w/ Label
781-04175 Discharge Chute Base
710-04373A Discharge Chute Screws (3x)
720-04091 Foam Grip
710-0487 Carriage Screw
720-04072A Star Knob