Owner's manual

3-54
Removing the Tiller from the Carton
1. Remove the staples from the top of the carton
using a pair of pliers. See Figure 3-147.
2. Carefully slice the carton tape sealing the top of
the carton using a utility knife.
3. Grasp the top flaps of the carton and pivot them
outward.
4. Remove all loose components from the carton
and set them aside. See Figure 3-148.
5. Remove all packing materials.
6. Remove the tiller from the carton.
NOTE
There are many ways to remove the unit from
the carton. Perform this step in a manner that best
suits you, and make certain the control cable does
not get bent or kinked during removal. See Figure
3-149.
7. Remove and read all of the manuals. See Fig-
ure 3-150.
8. Fill out the registration form.
9. Locate the model and serial label and record
this information in your owners manual and on
the registration form. See Figure 3-151.
450 SERIES DUAL DIRECTION REAR TINE TILLER
Tillers.fm Page 54 Tuesday, February 19, 2002 1:28 PM