Full Product Manual

17Section 4 — Product care
Tractor will not mulch grass
1. Wet grass
• Do not mulch when grass is wet
2. Excessively high grass
• Mow once at a high cutting height,
then mow again at desired height or
make a narrower cutting swath
3. Dull blade
• Sharpen or replace blade
Tractor stopped or will not start
1. Electrical system fault
• Shut off and restart tractor
• If problem persists, contact an
authorized service dealer
The blades do not rotate /blades stopped
1. Overload
• Allow deck motor(s) to cool/raise
deck height
2. Low battery
• Return home, plug into charger
The blade(s) stopped when traveling in reverse
1. Blade(s) stopped
• Restart blade(s) (PTO)
• Make sure Reverse Caution Mode is
activated
Reduced Speed
1. Low battery
• Charge battery as instructed in the
battery charger manual
2. Overload
• Raise deck
LCD Screen Messages
Brake Switch Fault: The deck and drive shut off.
Power off and restart tractor. If problem persists
contact qualified service personnel.
Accelerator Pedal Sensor Fault: The deck
and drive shut off. Power off and restart tractor.
If problem persists contact qualified service
personnel.
Seat Switch Fault: The deck and drive shut off.
Power off tractor, sit in seat and restart tractor.
If problem persists contact qualified service
personnel.
Cutting Deck Overload: The deck and drive shut
off. Power off the tractor, clean under the deck
as instructed in the Post-Operation Tractor Care
section and restart the tractor. Raise the deck and/
or cut at a slower pace. If problem persists contact
qualified service personnel.
Drive Motor Over Current Fault: The deck and
drive shut off. Power off, let the tractor cool and
restart tractor. If problem persists contact qualified
service personnel.
Drive Motor Control Fault: The deck and drive
shut off. Power off and restart tractor. If problem
persists contact qualified service personnel.
Self Test Fault: The deck and drive shut off. Power
off and restart tractor. If problem persists contact
qualified service personnel.
Electrical Faults: The deck and drive shut off.
Power off and restart tractor. If problem persists
contact qualified service personnel.
Battery Temperature Low: Move the tractor to
a warm location and allow the battery to warm.
If problem persists contact qualified service
personnel.
High Temperature Faults: Power off, let the
tractor cool and restart tractor. If problem persists
contact qualified service personnel.
Charge Port Door is Open: The tractor will come to
a stop and shut off. Close the charge port door and
restart tractor. If problem persists contact qualified
service personnel.
Low Battery Warning: The battery is low and
should be charged as soon as possible.
Sharpen Blade Warning: When this warning
is displayed, the blades should be checked and
sharpened.
Check Tire Pressure Warning: When this warning
is displayed check and adjust the tire pressure.
Notes