Manual

Section 8
m
Specifications
Engine Type ..................................................................... Air-Cooled, 2-Cycle
Displacement ..................................................................... 1.4 cu. in. (25 cc)
Clutch Type ........................................................................... Centrifugal
Idle Speed RPM .................................................................... 2,400-3,600 rpm
Operating RPM (Trimmer) ............................................................ 6,500-8,600 rpm
Ignition Type ............................................................................ Electronic
On/Off Stop Control ................................................................... ToggleSwitch
Lubrication ........................................................................ Fuel/Oil Mixture
Fuel/Oil Ratio ............................................................................... 32:1
Fuel ................................................................................... Unleaded
Carburetor ................................................................... Diaphragm, All-Position
Starter .............................................................................. Auto Rewind
Muffler ......................................................................... Baffled with Guard
Throttle ...................................................................... Manual Spring Return
Fuel Tank Capacity ................................................................... 20 oz (591 ml)
Drive Shaft Housing .................................................................. Aluminum Tube
Throttle Control ................................................................... Finger-Tip Trigger
Unit Weight (No Fuel, with D-handle, Cutting attachment shield and Cutting attachment) .......... 9.31 Ibs (4.22 kg)
Cutting Mechanism ........................................................... Dual String Cutting Head
Line Spool ...................................................................... Bump Line Releaser
Line Spool Diameter ............................................................. 4 inches (101.6 ram)
Trimming Line Diameter ........................................................ 0.095 inches (2.41 mm)
Cutting Path Diameter ........................................................... 17 inches (41.55 cm)
19