Service manual

Poly Bed 4 X 2 Brake System
45
3.11. Confirm that the parking brake light illuminates
on the instrument panel when the parking brake
is applied, and goes out when the parking brake
is released. See Figure 3.11.
3.12. If necessary the parking brake switch can be
adjusted in its slotted mounting bracket.
See Figure 3.12.
3.13. If switch adjustment fails to make the parking
brake light work properly, electrical diagnosis is
necessary.
3.14. Install and secure the hood.
Figure 3.11
Figure 3.12
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983