Service manual

HYDRAULIC SYSTEM
6-27
D569-W03 June-2003
1.5 DISASSEMBLING AND
ASSEMBLING
A. AUXILIARY CONTROL VALVES
(1) Pipe A (8) Joint Bolt 2
(2) Pipe B (9) Quick Coupler
(5) Bracket (10) Bolt
(6) O-Ring (11) Seal Washer
569W635B
(if equipped)
1. Loosen and remove the joint bolt 2 (8), hydraulic
pipes ((1), (2)), bracket (5) and quick couplers (9)
as a unit.
2. Loosen and remove the auxiliary control valve
mounting two nuts (18), washer (17) and take out
the auxiliary valves (13) from the power lift body.
(When refilling)
• Take care not to damage the O-rings.
(15) O-Ring (16) Flange
(12) Stud (17) Washer
(13) Auxiliary Valve (18) Nut
(14) O-Ring
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983