Service manual

TRANSMISSION
4-9
D615-W02 May-2003
615W410A
615W409A
2.4 MID PTO
• Consists of an independent PTO, which uses a gear
engagement shift method and performs gear trans-
mission when PTO clutch is set to OFF.
Power Transmission Flow
• 12 gear shaft (1) → 20 spur gear (2) → 41 spur gear
(3) → 14 gear (4) → Mid PTO shaft (5)
Power Transmission Flow
(1) 12 Gear Shaft (4) 14 Gear
(2) 20 Spur Gear (5) Mid PTO Shaft
(3) 41 Spur Gear
• 22 Gear shaft (PTO) (1) → 22 Gear (2) → 23 Gear
(3) → 23-19 Gear (4) → 19 Gear (5) → 33 Gear (6)
→ Counter shaft (PTO) (7) → PTO clutch assembly
(8) → 12 Gear shaft (9) → 12 Gear (10) → 30 Gear
(11) → PTO drive shaft (12) → PTO shaft (13)
Applicable Model
8354/8404
PTO type
Independent PTO
PTO stage
1st stage fixed type
PTO rpm/Engine rpm
540/2505
(1) 22 Gear Shaft (PTO)
(2) 22 Gear
(3) 23 Gear
(4) 23 - 19 Gear
(5) 19 Gear
(6) 33 Gear
(7) Counter Shaft (PTO)
2.5 REAR PTO
• The independent PTO method in the 1st stage is
the fixed type, and employs a hydraulic clutch.
(8) PTO Clutch Assembly
(9) 12 Gear Shaft
(10) 12 Gear
(11) 30 Gear
(12) PTO Drive Shaft
(13) PTO Shaft
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983