MSDS

Ingredient Name
CAS-No.
Approx.
Weight %
TWA STEL Ceiling limits Skin
designations
PROPANE
74-98-6
10 - 15 1000 ppm TWA
Aliphatic
hydrocarbon gases:
Alkane C1-C4
BUTYL ACETATE
123-86-4
10 - 15 150 ppm TWA 200 ppm STEL
BUTANE
106-97-8
5 - 10 1000 ppm TWA
Aliphatic
hydrocarbon gases:
Alkane C1-C4
TITANIUM DIOXIDE
13463-67-7
5 - 10 10 mg/m
3
TWA
1,2,4-TRIMETHYLBENZENE
95-63-6
1 - 5 25 PPM
9. PHYSICAL PROPERTIES
Odor: Normal for this product type.
Physical State: Aerosol
pH: not determined
Vapor pressure: NOT DETERMINED mmHg @ 68ºF (20ºC)
Vapor density (air = 1.0): 4.6
Boiling point: -44ºF (-42ºC)
Solubility in water: not determined
Coefficient of water/oil distribution: not determined
Density (lbs per US gallon): 6.81
Evaporation rate (butyl acetate = 1.0): 5.6
Flash point (Fahrenheit): -100
Flash point (Celsius): -73
Lower explosive limit (%): 1
Upper explosive limit (%): 13
Autoignition temperature: not determined
10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
Conditions to Avoid: Heat.
Incompatibility: Strong oxidizing agents
Hazardous Polymerization: None anticipated.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide. Metal oxide fumes.
Sensitivity to static discharge:
Subject to static discharge hazards. Please see bonding
and grounding information in Section 7.
11. TOXICOLOGICAL INFORMATION
Ingredient Name
CAS-No.
Approx.
Weight %
NIOSH - Selected LD50s and LC50s
DIMETHYL KETONE-
EXEMPT SOLVENT
67-64-1
35 - 40 = 5800 mg/kg Oral LD50 Rat
Product ID: 160.7884022.076
Page 5 / 9