Owner`s manual

66
Bulletins, Etc.
2
Figure 6. Correct Offset Key Orientation.
Figure 5. Correct Offset Key Installation.
Figure 4. Offset Key.
Offset Key
Crankshaft
Flywheel
Offset Key
Flywheel
Figure 3. Straight Woodruff Key.
1. Remove the straight ě key and discard it.
See Figure 3.
2. Install the 6° ě key. See Figure 4. Correct
orientation of the key is necessary for proper
ignition timing. The ę mark must face
out, when viewing the Ě¢ as it is mounted.
See Figures 5 and 6.
NOTE: Improper installation of the ě key can
cause improper ignition timing and damage to
the engine.
NOTE: If a 22° Ě¢ is being replaced on a
CH/CV730 engine, it is recommended that
a 16° Ě¢ and straight ě key be
used.
,GHQWL¿FDWLRQ
Mark
,GHQWL¿FDWLRQ
Mark
,GHQWL¿FDWLRQ
Mark