Owner`s manual

64
Bulletins, Etc.
4
Figure 13. Lead Routing Details.
14. ȱȱȱȱȱȱĚ¢ǰȱȱ
ȱȱǯȱ¢ȱȱȱȱȱ
Loctite
®
No. 243 to the threads and install the three
ȱȱǯȱȱȱȱ
9.9 N·m (88 in. lb.). See Figure 14.
Molded
Clip
Figure 15. Fan and Grass Screen Installation Details.
Screws
Fan Screws
Mounting
Studs
Stiffener
Grass
Screen
Reinforcing
Washers
Fan
Mounting
Screws
Mounting
Screws
Figure 14. Installing Fan.
15. ȱȱȱȱȱȱȱȱ
ȱȱȱȱȱĚ¢ǯȱȱȱ
stud to 9.9 N·m (88 in. lb.). See Figure 15.
16. ȱȱěȱȱ¢ȱȱȱȱ
screen onto the four hex studs. Position the
ȱȱȱȱȱȱȱ
ȱȱȱȱǰȱȱ¡ȱȱȱ
ȱȱȱȱȱȱȱǰȱȱȱ
alignment tang is inserted into one of the grass
ȱǯȱȱȱȱȱȱ
using Loctite
®
ȱǯȱŘŚřȱȱȱǯȱȱȱ
ȱȱ9.9 N·m (88 in. lb.). See Figure 15.
17. ȱȱȱȱȱǯȱȱȱŗŜǯ
Alignment
Tang
Mounting
Locations
Figure 16. Installing Blower Housing.
18. ȱȱȱȱȱȱȱȱ
ǯȱȱȱȱȱ2.0 N·m (17.7 in. lb.).
19. ȱȱȱ¢ȱȱȱȱȱ
ȱȱǯȱȱȱȱȱ
2.0 N·m (17.7 in. lb.). See Figure 17.
Mounting
Locations
Cylinder
Shrouds
Figure 17. Installing Cylinder Shrouds.
20. ȱȱȱȱǰȱȱǻȬǼȱ
Ĵ¢ȱȱȱȱȱȱǯ
CAUTION: Grass Screen Can Cause
Personal Injury
Failure to utilize or reassemble the grass screen as designed
could result in grass screen failure and serious personal
injury.
13. Place the leads under the molded clip on the
starter side. See Figure 13.
Please Note:ȱȱȱ¢ȱȱȱȱǯȱȱ
ȱȱME-4125-Mȱȱȱȃ£ȱ¢Ȅȱȱ
ȱ¡ȱŗŝȱȱȱ¢ȱȱǯ