Owner`s manual

6
Command Series
DSAI Wiring Harness Upgrade
To combat occasional voltage spikes, we have upgraded
the wiring harness for both the vertical and horizontal
engines.
7KHVHVSLNHVKDYHEHHQUDQGRPXQLGHQWL¿HGDQGFRXOG
occur for a variety of different reasons, but ultimately
destroy the DSAI. The upgrade adds diodes to the harness
to protect the DSAI up to 3000 watts. This step was taken
to prevent the potential for repeat failures, and an upgrade
of the wiring harness is recommended anytime this type of
failure happens.
These kits are an interim repair while the DSAI is being
redesigned to include the upgraded diodes needed to
prevent any future incidents. Refer to Service Bulletin 291
in “Bulletins, Etc.” for further information and illustrations.
Wiring Harness Part Numbers
Spade Terminal - 24 176 153-S
Bullet Terminal - 24 176 154-S
•
•
Diode Upgrade
Electronic Governor
There have been some concerns regarding the function,
adjustment, and troubleshooting of the electronic governor
system. TechTips 2008-01 and 2008-02 have been written
to cover any and all concerns regarding the Electronic
Governor.
These TechTips cover general information, mechanical
checks, troubleshooting procedures, blink code information
DVZHOODVÀRZFKDUWDQGHOHFWULFDOGLDJUDPLQIRUPDWLRQ,W
is a must read for the savvy technician and is printed in its
entirety in this update book.
See TechTip 2008-01 and 2008-02
Spade
Bullet
Illustration of Terminal Ends