Product Manual

7se c t i O n 3 — as s e M b l y & in s t a l l a t i O n
Note: If you decided to leave the hitch support only finger
tight during the assembly process, securely tighten all of
the hardware at this time.
If Mounting Assembly onto 700 Series Tractors
Note: Install the two included clevis pins through the mounting
assembly and secure to the 700 series mounting brackets
installed earlier with click pins provided in the hardware pack.
Refer back to Fig. 3-3.
Install Suitcase Weights
Simply hook the included suitcase weight over the hitch bracket
assembly as shown in Fig. 3-7. More weights can be purchased as
needed based on each individual application. Refer to the part
list page in this manual to identify the part number, then refer to
page 2 of this manual for company contact information to order
additional suitcase weights or other parts.
Mount Assembly on Tractor
Install mounting assembly on tractor as follows:
Place the hooked ends of the mounting assembly over 1.
the shoulder bolts, as in Fig. 3-5, on the tractor and line up
the hitch support bracket center hole with the hole on the
tractor’s hitch.
Install the larger clevis pin included with this kit into the 2.
tractor’s hitch and secure with the included hairpin clip. See
Fig. 3-6.
Note: The clevis pin can be fed down through the hitch
plate and secured underneath with the hairpin clip, or it
may be easier to feed the clevis pin up through the hitch
plate hole and secure with the hairpin clip on the topside.
The latter method may be preferred since it can be easier
to insert the hairpin clip. Either way will work, the decision
should be based on operator preference.
Align hole on bracket
with hole on tractor
Figure 3-5
Figure 3-7
Figure 3-6