Product Manual

Assembly & Installation
3
5
700 Series Tractors Only
If you are assembling this weight kit for use on any model 700
series tractor you will need to install the two tractor mounting
brackets packed in your bagger kit. If you are installing this
weight kit on any other tractor, disregard these steps and move
to Assemble Mounting Brackets on the next page.
To install these brackets on a model 700 series tractor, follow
these steps:
Install a shoulder bolt from your hardware pack on each 1.
bracket, securing them with flange lock nuts also included
in the hardware pack. Refer to Fig. 3-1.
Insert the clevis pins from your hardware pack on each 2.
bracket, securing them with clip pins also included in the
hardware pack. Refer to Fig. 3-1
Mount the 700 series tractor mounting brackets to your 3.
tractor using four self-tapping hex screws included with
your kit . See Fig. 3-2.
Figure 3-1
Figure 3-2