Install Manual

18. Fully insert the endsof the front of the cabassembly
into the endsof the crossbar (J).Insert set screws (S)
into endsof crossbar(J).With assistant holdingcab
assemblyhorizontalto the ground, tightenall bolts and
setscrews.
19. Finishassemblybyfastening all hook-and-loopstraps
insidethe cab if not completedat earliertime.
CAUTION:No cabfabric shouldbeallowedto touchengine
orexhaust,
20, Using hook-and-loopstraps,secureconvenientpouch
on the insideof your snowthrower cab,
2_. Thecab is designedto accommodatesnowthrowers
equipped with a light, Zipperson the front of the cab
can be openedand the flaps pulledbackand secured
with hook-and-loopstrapsto allow the lightto shine
through.At this time, adjustmentsmay benecessary
for free movementof operationcontrols.
Downloaded from www.Manualslib.com manuals search engine