Replacement Part List

21
Labels
1.
2.
3.
4.
5.
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT
WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET
.
USE CLEAN-OUT TOOL TO UNCLOG DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE ,
AND REMAIN BEHIND
HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES ,
NEVER DIRECT
DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN
OPERATING ON
GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
DANGER
CLEAN-OUT TOOL
DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
777D19025
777S32636
777I22363
777D19024
777D19026 777D19028777D19027 777D19030
777D15109
777D15110
777D15113
777D15114
777I22340
777I22339 (STD) 777I22341 (Steel)
777X43688
STARTING INSTRUCTIONS:
CHUTE DIRECTIONAL CONTROL
CHUTE TILT DOWN
CHUTE TILT UP
PUSH BUTTON
CHUTE ROTATE
LEFT
PUSH BUTTON
CHUTE ROTATE
RIGHT
1.) INSERT KEY AND SNAP IN PLACE.
2.) MOVE THROTTLE CONTROL TO THE “FAST”
POSITION.
3.) MOVE CHOKE CONTROL TO THE “CHOKE”
POSITION. PUSH PRIMER 3x.
4.) ROPE START: PULL SLOWLY UNTIL HARDER
TO PULL, THEN PULL RAPIDLY TO START.
REPEAT PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH STARTER
BUTTON. REPEAT PRIMING IF NEEDED.
5.) MOVE CHOKE CONTROL SLOWLY TO THE
“RUN” POSITION.
6.) TO STOP ENGINE: MOVE THROTTLE TO THE
“STOP” POSITION.
ON OFF
777I23013
POWER
STEERING
TRIGGER CONTROL
777S32280 (Steel) 777D19023 (Steel) 777D19022 (STD)
3X
26"
THREE STAGE POWER
™
D19026
3X
26"
HD
THREE STAGE POWER
™
D19028
3X
28"
THREE STAGE POWER
™
D19027
3X
30"
HD
THREE STAGE POWER
™
D19030
™
™
I2 2 3 41
AC
STARTING INSTRUCTIONS:
CHUTE DIRECTIONAL CONTROL
DISCHARGE
LEFT
DISCHARGE
RIGHT
CHUTE TILT
DOWN
CHUTE TILT
UP
1.) INSERT KEY AND SNAP IN PLACE.
2.) MOVE THROTTLE CONTROL TO THE “FAST”
POSITION.
3.) MOVE CHOKE CONTROL TO THE “CHOKE”
POSITION. PUSH PRIMER 3x.
4.) ROPE START: PULL SLOWLY UNTIL HARDER
TO PULL, THEN PULL RAPIDLY TO START.
REPEAT PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH STARTER
BUTTON. REPEAT PRIMING IF NEEDED.
5.) MOVE CHOKE CONTROL SLOWLY TO THE
“RUN” POSITION.
6.) TO STOP ENGINE: MOVE THROTTLE TO THE
“STOP” POSITION.
420cc OHV
ELECTRIC START
CAST IRON SLEEVE
D15114
D15110
420cc OHV
ELECTRIC START
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.