User Manual

2
310-3000 IHT
HYDRO - GEAR
SULLIVAN, IL. U.S.A.
Made in U.S.A.
8 328 T1 476
310-3000
165758
Year Built
Hydro-Gear
Number
Type of Product and Build Information
OEM Model
Number
Serial Number
(unique for that model - for that day)
Date
(Julian - day of year)
dis charged through the charge relief valve. The
charge relief valve maintains the charge pres-
sure at no more than 40 PSI.
The motor cylinder block mounts onto the
splined motor shaft which drives the planetary
dif fer en tial gear/dif fer en tial as sem bly.
The bypass feature in the 310-3000 IHT has
a me chan i cal le ver which lifts the motor block
off of the center section running surface, al-
lowing any oil fl owing from the pump block to
be dis charged into the housing without turning
the mo tor.
Figure 2. 310-3000 Confi guration Label
PRODUCT IDENTIFICATION
The model and confi guration of the 310-3000
IHT can be determined from the la bel shown
in Fig ure 2.
TECHNICAL
SPECIFICATIONS
Technical specifi cations for the 310-3000 IHT
are given in Table 1.
Table 1. Technical Specifi cations
Overall Transaxle Reduction
30.15:1
Input Speeds
Maximum: 3600 RPM
Minimum: 1800 RPM
Maximum Tire Diameter
23 inch; 584 mm
Axle Shaft Options
Type: Keyed
Diameter: 1 inch; 25.4 mm
Type: Flanged
Diameter: Hub
Brake Type
Disc
Weight of Unit
58 lb; 26 kg