Owner's manual

AUGER SYSTEM

NOTE: There is a lube port on the top of the transmission.

See Figure 4.33.

• The transmission contains Alvania EP grease (part number

737-0168A, 8 oz. tube), though it should not need to be re-

filled in normal operation.

NOTE: The components of the gear box are:

• The impeller shaft with a worm gear.

• 20T helical gear

• A flange bearing and thrust bearing

positioned behind the worm gear

• .25” OD x 1.25” LG dowel pin

• Oil seal towards the rear of the gear box

Figure 4.33

Figure 4.34

Housing halves

Washers

Bronze gear and key

Auger shaft

Impeller shaft /

Worm gear

Thrust

collar

bearing

Bearing

Seal