Instruction Manual

Body
33
7. Unthread the fuel cap.
8. Pull the fuel cap tether retainer out of the fuel tank
using a long pair of pliers. See Figure 4.20.
NOTE: The fuel cap tether is mandated by the EPA. If it is
broken, the fuel cap must be replaced.
9. Remove the reverse drive pedal using a 9/16”
wrench. See Figure 4.21.
10. Remove the forward drive pedal using a 9/16”
wrench.
11. Remove the two screws, one on each side, that hold
the front of the running board to the running board
brackets using a 1/2” wrench.
Figure 4.20
Tether
Figure 4.21
Reverse pedal
Forward
pedal
Figure 4.22
Screw