Instruction Manual

Body
27
Hood components: Headlight removal
1. With the spade terminals disconnected, rotate the
lamp holder (socket) to release it from the grille
assembly. See Figure 4.5.
NOTE: The GTX2154LE has a LED headlight assembly. It
is removed the same way as the incandescent
headlight assemblies.
2. Rotate the bulb to release it from the socket.
See Figure 4.7.
NOTE: The LED assembly does not come apart.
3. Install the replacement lamp following the above
steps in reverse order.
Figure 4.5
Figure 4.6
LED headlight assembly
Figure 4.7
Single-pin 1156-style lamp
Socket
Ground terminal
Power terminal