Instruction Manual

2000 Series Tractors
174
Electric PTO clutch
To remove/replace the PTO clutch:
1. Remove the hood by following the procedures
described in Chapter 4: Body.
2. Remove the PTO belt by following the procedures
described in the PTO belt section of this chapter.
3. Disconnect the harness from the PTO clutch.
See Figure 8.51.
NOTE: Some of the GTX2154LE tractors have a
diode jumper between the harness and the
PTO clutch. See Figure 8.52.
NOTE: When the PTO clutch dis-engages, it can
produce voltage spikes. The diode can help
minimize these spikes.
Figure 8.51
PTO clutch
connector
Figure 8.52
Diode jumper