Instruction Manual

Electrical System
107
Run Circuit / Reverse Caution mode
1. With the key in Reverse Caution mode, A1 gets
power from the B terminal, just like the normal run
position.
2. In addition, A2 is internally connected to the L termi-
nal. L is normally used for the lighting circuit.
2a. In this case, a separate lighting circuit draws
power from A1
2b. L is connected to the ground wire on the G ter-
minal by a jumper.
3. The RMC module arms when it gets a ground signal
from A2 through the “A2 pwr” terminal on the RMC
module. See Figure 7.21.
2-#-ODULE
3EAT3W
237
'RND
!PWR
!PWR
%04/
h/Nv
'
!
,
3
!
-
"
+EY3WITCHh2EVERSE#AUTION-ODEv
"ATTERY
.%'
0/3
&USE
'RND
'ROUND
'ROUND
h!RMEDAND!CTIVATEDv
04/3WITCH
#/-
./
.#
3YSTEM
-ONITOR
(EADLIGHTS
04/2ELAY
!T2EST
!FTERFIRE
3OLENOID
'ROUND
!
"
#
6WDUWHU0RWRU
*URXQG
6ROHQRLG
Figure 7.21