Manualshelf

Use and Care Manual

ManualsBrandsCub Cadet ManualsOutdoor Power Equipment58 in. Snow Blade for Z-Force S-Series Zero Turn Mowers and Tank SZ Zero Turn Mowers (2014 and After)
12345678910
Section 2 — ASSembly & Set-Up
9
24. Install the eyebolt assembly (#6) onto the handle mount
bracket (#7) with the wing nut (#14). See Figure 2-16.
Figure 2-16
25. Adjust the jam nuts (#24) on the lift rod (#5) until it is
snug. Tighten securely. See Figure 2-14.Slide the blade
adjustment handle assembly (#2) into the eyebolt (#6) and
attach it to the outer hole on the blade adjustment arm
using a shoulder bolt (#21), flat washer (#20) and flange lock
nut (#13). See Figure 2-17 .
Figure 2-17
26. Cut the cable tie securing the blade release cable to the
blade frame assembly. Unroll the cable. Using the mounting
screw (#11), mount the blade release cable lever to the blade
adjustment handle assembly (#2). See Figure 2-18.
Figure 2-18
27. Secure the cable to the blade adjustment handle assembly
(#2) with the two cable ties (#17) provided. See Figure 2-19.
Figure 2-19