Instructions / Assembly

11Section 4 — ASSembly & inStAllAtion
Installing the Deck Baffle
1. Remove the deck as instructed in the tractor’s operator’s
manual.
2. Install the appropriate deck baffle (for 48-, 54- or 60-inch
deck) utilizing the holes already provided in the mowing
deck, as seen in Fig. 4-14, using four 710-0599 self-tapping
hex bolts from hardware pack 689-00159.
3. Reinstall the deck as instructed in the tractor’s operator’s
manual.
7. Open hood by pushing in on the rear, right-side tab with your
right hand, as seen in 1 of Fig. 4-12, and lifting the cover
with your left hand in the center rear of the bagger cover, 2.
8. Install the bag assemblies onto the bag support brackets by
inserting the front edge in first, as seen in 1 of Fig. 4-13, and
setting the back edge down until it fits into the assembly
(2).
1
2
Figure 4-12
Figure 4-14
1
2
Figure 4-13