Replacement Part List

9Section 4 — ASSembly & inStAllAtion
5. Secure the vertical support bracket to the mounting
assembly using a carriage bolt (710-0276) and wing knob
(720-04122) from hardware pack 689-00328A. See Figure
4 -7.
Figure 4-7
6. Install the hanger assembly onto the upright support
bracket using a carriage bolt (710-0276) and wing knob
(720-04122) from hardware pack 689-00328A. See Figure
4-8.
Figure 4-8
Align hole on bracket
with hole on tractor
Figure 4-5
Note: If you decided to leave the hitch support only
finger tight during the assembly process, tighten all of the
hardware securely at this time.
3. Install the vertical support bracket onto the mounting
assembly of the tractor by hooking it over the hitch plate as
seen in Figure 4-6.
4. Align the vertical support bracket with the mounting hole
that best suits the deck size of your machine. See Figure
4-6.
Note: Hole “A” is suggested for 50/54” decks, while Hole
“B” is suggested for 42” decks, and Hole “C” suggested for
46” decks. Some kits may contain plates with deck size
suggestions instead of letters.
Figure 4-6