Replacement Part List

11Section 4 — ASSembly & inStAllAtion
7. Open Hood by pushing in on the rear, right-side tab with
your right hand, as seen in 1 of Figure 4-15, and lifting the
cover with your left hand in the center rear of the bagger
cover, 2.
1
2
Figure 4-15
8. Install the bag assemblies onto the bag support brackets
by inserting the front edge in first, as seen in Figure
4-16, and setting the back edge down until it fits into the
assembly.
1
2
Figure 4-16
Figure 4-13
Figure 4-14