Product Manual

3
2. Place the L.H. Pivot Bracket onto the end of the Lift
Lever Assembly (the R.H. Pivot Bracket comes already
installed on the assembly). See Figure 2.
3. Attach the R.H. and L.H. Pivot Brackets to the Sleeve
Hitch Frame using four 3/8" x 1" carriage bolts and 3/8"
nylock nuts. See Figure 2.
3/8-16 x 1"
CARRIAGE
BOLT
3/8" NYLOCK NUT
LIFT LEVER
ASSEMBLY
SLEEVE HITCH FRAME
L.H. PIVOT BRACKET
R.H. PIVOT BRACKET
FIGURE 2
IDENTIFY YOUR TRACTOR TYPE
4. Compare the hinge brackets at the front of your tractor to
gure 3. If your hinge brackets resemble type A, proceed
to step 5 below. If your hinge brackets resemble type B,
proceed to step 7 on page 4.
TYPE (A) HINGE BRACKET
TYPE (B) HINGE BRACKET
FIGURE 3
FIGURE 1
5/16" X 1"
HEX BOLT
5/16" NYLOCK
NUT
SPACER
PIVOT
BRACKET
ASSEMBLY INSTRUCTIONS
1. Assemble a 5/16" x 1" hex bolt, a spacer and a 5/16"
nylock nut to the hole in the R.H. pivot bracket. See
gure 1.
FIGURE 4
INSTRUCTIONS FOR TYPE A TRACTORS
5. Hook the sides of the Sleeve Hitch onto the shoulder
bolts in the sides of the tractor frame. Attach the bottom
of the Sleeve Hitch to the tractor hitch using a 5/8" x
1-3/4" hex bolt and a 5/8" nylock nut. See Figure 4.
6. Proceed to step 11 on page 4.
LIFT LEVER
ASSEMBLY
SLEEVE HITCH
FRAME ASSEMBLY
SHOULDER
BOLT
5/8" NYLOCK NUT
HEX BOLT 5/8" x 1-3/4"