Instructions / Assembly

Attaching the Grass Bag Assembly
(Older Style Deck)
Remove the Chute Strap
Remove and discard the clevis pin, washer, hairpin clip and 1.
chute strap. See Fig. 10.
Insert the rivet [M] into the hole in the chute and push the 2.
rivet’s plunger down to lock it in place. See Fig. 11.
Install the Chute Latch
Pull the rivet’s plunger upward to unlock it and remove the 3.
rivet from the hole in the chute. See Fig. 12.
Secure the latch [J] to the chute with the hex screw [L], 4.
washer [K] and flange lock nut [G]. See Fig. 13.
M
G
K
J
L
Figure 10
Figure 11
Figure 12
Figure 13
6 se c t i O n 2— as s e M b l y & se t -up