Instructions / Assembly

Assembling the Grass Bag
Place grass bag [A] over chute assembly [B]. See Fig. 8.1.
Use the cable tie [I] to secure bag to chute assembly by 2.
inserting the cable tie into hole in bag and pulling through.
Make sure cable is positioned so it ties bag around
indented groove (over flange) of chute. See Fig. 8. Pull
cable tight with pliers.
Attaching the Rod Hanger
Insert rod hanger [D] into the opening in the rod assembly 1.
[C]. See Fig 9.
Slide the tabs on the grass bag over the bag hanger rod. 2.
See Fig. 9.
Attaching the Grass Bag Assembly
(newer Style Deck)
Lift the chute deflector on the deck back towards engine. 1.
See Fig. 9.
Place the bottom lip of the chute/grass bag assembly into 2.
the lip on the deck. See Fig. 9.
Place the tab of the chute/grass bag assembly into the 3.
bracket on the deck. See Fig. 9.
Lift chute/grass bag to position hole in chute over stud 4.
on the deck. The bracket on the chute will hold the chute
deflector into an upright position. See Fig. 9.
Pull the strap over the tab on the deck. See Fig. 9.5.
B
A
I
D
C
Figure 8
Figure 9
Figure 8
1
3
2
4
5
5se c t i O n 2 — as s e M b l y & se t -up