Service manual

15
D. LUBRICATION CHART:
NUMBER OF
GREASING
POSITIONS ITEM DESCRIPTION
DAILY 2 A Cutter Blade Spindle Bearings
EVERY
40
HOURS
2
2
2
1
B
C
D
Caster Wheel Bearing
Caster Wheel Pivot Shafts
Deck Idler Pulley Pivot Arms
Blade Clutch Bellcrank Pivot
Float Deck Mower
Gear Deck Mower
Figure 4
E. ENGINE MAINTENANCE:
For detailed maintenance instructions for the engine on your mower, see the Engine Manual packed with your
mower.
F. HYDRAULIC SYSTEM MAINTENANCE:
The hydraulic system should not require maintenance other than the changing of the hydraulic oil and the oil
filter at 100 hours and every 500 hours thereafter. The pumps and wheel drive motors are not owner
repairable. If you have a problem with a pump or wheel drive motor, call your authorized Cub Cadet
Commercial Dealer for a replacement. Do not disassemble the pump or wheel drive motor.