Manual

24 ADJUSTMENT

Separate choke type

Throttle Cable Installation, Adjustment

• Link the thmltle cable (G) to the speed control

lever(C) and looselyclampthe throt!lecable outer

housing (F) wr_ the cable clamp bolt (A).

• Move the throttle leverto =FAST" position.

• Pull up the outer housing (F) of the throttle cabre

untilthe inner wire {G) has elmost no slack, and

tighten the cable clamp bolt (A).

• Move the throttle lever to =stow"position. Make

sure thatthe carburetor throttlevalve (H} ismoved

smoothly.

Choke Cable Installation, Adjustment

• Link the choke cable (K) tothe choke control lever

(D), and Ioose|y clamp the choke cable outer

housing (L) with the cable clamp bolt (B).

• Move the equipment choke controlto =OPEN" po-

sition. Make sure that the carburetor choke valve

(M) is fully opened.

• Pull up the outer housing (L) of the choke cable

until the Inner wire (K) has almost no slack, and

tightenthe cable clamp bolt(B).

• Move the equipment choke contro| to "CHOKE"

position. Make sum that the carburetor choke

valve (M) iscompletely closed.

• Make sure that the choke valve turns from fully

dosed positionto fully opened pos_on when ac-

tuatingthe equipment choke control.

H. ThrottleValve

M. ChokeValve

ADJIJSTMENT 25

_B41Y_eE5