Manual

24 ADJUSTMENT

Separate choke type

Throttle Cable Installation, Adjustment

• Link the throttle cable (G) to the speed control

lever (C) and loosely clamp the throttle cable outer

housing (F)with the cable clamp bolt (A).

• Move the throttle lever to =FAST" position.

• Pull up the outer housing (F) of the throffie cable

until the inaer wire (G) has almost no slack, and

tighten the cable clamp bolt (A).

• Move the throttle lever to =slowJ position. Make

sure that the carburetor throttle valve (H) ismoved

Choke Cable Installation, Adjustment

, Linkthe chokecable (K) tothechokecontrollever

(D), and loosely clamp the choke cable outer

housing(L)withthe cable damp bolt(B).

e Movethe equipmentchokecontrol to "OPEN"po*

sition.Make surethat the carburetor chokevahte

(M) isfullyopened.

e Pull up the outer housing(L) of the chokecable

untilthe innerwire (K) has almostno slack, and

tighten the cable clamp bo_ (B).

• Move the equipmentchoke controlto "CHOKE"

Make sure that the carburetorchoke

valve (M) iscompletelyclosed.

• Make sure that the chokevalve _ms from fully

closedpositionto fully opened positionwhen ac-

tuatingMe equipment choke control.

H.ThrottleValve

M.ChokeValve

ADJUSTMENT 25

RH_I4I¥OBIF4 G