Phau Ntawv Qhia

Wiring Centre10 Model: UH8-RF V2
NeoAir Pairing
Applies to NeoAir V2/NeoAir V2M & V3
• Use the Left / Right keys to scroll to the power icon ...................................................................................
• Press and hold the Tick key for 3 seconds.............................................................................................................................
• SETUP will be highlighted*, now press the tick key once.................................................................................................
The display will show 01 in the top right hand corner.
• Press the Down arrow key once. The display will now show P1.....................................................................................
• Press Tick again to start 99 second countdown**..............................................................................................................
• The thermostat will send a signal for 99 seconds and will flash the RF signal icon...........................................
• On the UH8-RF V2, press and hold the desired zone pairing button for 5 seconds or until the zone light
flashes steadily.
**Active pairing mode
Once the neoAir has successfully paired to the UH8-RF V2, the zone light will stop flashing.
• When pairing is complete, cancel the countdown on the thermostat by pressing the tick key once .................
• Now tap the down key to highlight the power icon ...........................................................................................................
• Press tick to return to the main screen................................................................................................................................................
*Setup Menu Entry Point
13Model: UH8-RF V2