Phau Ntawv Qhia

*Pairing Menu
**Active Pairing
Step 2, On the Slimline-RF V3:
• Turn Off the thermostat by, holding down the Power button for 3 seconds..................................................................
• Now hold down the H button for 3 seconds unit you see P1 in the top right hand
corner of the display*.........................................................................................................................................................................
• Tap the H button once while P1 is shown to start a 99 second countdown**..............................................................
• During the countdown the thermostat will transmit a signal and flash the RF
icon at the top left hand corner of the display..........................................................................................................................
If pairing is successful, the countdown will jump straight to 00 followed by a blank
screen.
• Press the Power button on the thermostat once to turn the unit back On.......................................................................
If in mode 02, the hot water timer will automatically be paired to the HW channel.
If pairing is unsuccessful, eliminate a possible signal issue by repositioning the thermostat
closer to the receiver and repeat the pairing process again.
Step 1, On the UH8-RF V2:
• Press and hold the pairing button on the desired channel until the output indicator LED
flashes. Pairing mode is now active on the UH8-RF V2.
Once the UH8-RF V2 detects the pairing signal from the Slimline-RF V3 the output light will turn off.
Slimline-RF V3 Pairing
11Model: UH8-RF V2