Technical data

12.4.2002 Rev. 2.0
Operation instructions
19
Pivoting Heat Curtains: Clean as needed. Unhook the pivoting heat curtains from the
rods above the entrance and exit ends of each conveyor. Wash, rinse and dry thoroughly.
Re-install.
Adjustable Heat Curtains: Clean as needed. Remove adjustable heat curtains from each
end of oven. Wash, rinse and dry thoroughly. Re-install.
Cleaning the Exterior
Disconnect the oven’s power supply cord from its receptacle before you start to clean the
oven.
Clean the outside of the unit using a damp cloth or stainless steel cleaner. Do not clean
control panel with an abrasive cleanser. Use only a damp cloth. Be very careful when
cleaning the unit not to allow water to enter the unit through any of the openings in the
control panel box. Liquid in the control panel area could cause damage to the controls or
could cause electrical shorts in the unit which could shock someone. Do not allow water
or water droplets to enter into the: a) fan filter, b) louvers on the side of the oven, c) area
behind the control panel, or d) operating controls.