Technical data

12.4.2002 Rev. 2.0
Functional description
4
3.2.1 Component Location
1. 10 cm Adjustable Legs
2. Heat Curtain
3. Crumb Tray
4. Oven Data Plate, located under conveyor
5. Conveyor
6. Controls
7. Conveyor Motor
8. Control Compartment Cooling Fan
3.2.2 Component Function
1. Single and Stacked Ovens
The CTX model G-26 is available as either a single oven or two ovens stacked.
Each unit is supplied with four 10 cm adjustable legs. The legs must be used on
single oven or lower oven of stacked oven to validate the warranty.
The stacked oven is made up of two separate units, one on top of the other. Mount-
ing pins (P/N G26STACK) must be installed when stacking two ovens, if pins are
not used warranty will be voided.
2. Cooking Area
The CTX Model G-26 has a 660mm long cooking deck (chamber) with a 406mm
wide conveyor belt.
3. Controller
The Controller controls both the temperature and conveyor belt speed (cook time)
of the oven. Cook temperature can be set to from 93°C to 509°C and cook time can
be set from 01:00 minute to 30:00 minutes.
4. Infrared Heating Panels
Patented heating panels are positioned above and below the conveyor belt of each
oven deck (chamber). When energized these panels emit infrared long waves.
1
2
3
4
5
6
7
8