Installation guide

SMDR6 Installation Guide 3
6. Attach the DB25 serial cable to the RS-232 port of the SMDR6
unit by tightening the thumb screws.
7. Connect the SMDR6 unit’s line jack (next to the DB-25 connec-
tor) using a line cord to any unused station port on the KSU.
8. Plug the power supply into the SMDR6 unit.
9. Plug the power supply adapter into a standard AC outlet.
You are now ready to set and connect the printer.
~
Terminal
(to phone)
Line
(to KSU)
DB-25
9 V DC
LED
888385_01 Install.book Page 3 Wednesday, November 11, 1998 2:45 PM