User`s manual

3.6.4 Load Factory Settings Except Network Configuration

Load Factory Settings Except Network Configuration will set all configurations of the

Managed Switch back to the factory default settings. However, IP and Gateway addresses

will not restore to the factory default. Load Factory Settings Except Network

Configuration is very useful when network administrators need to re-configure the system

“REMOTELY” because conventional Factory Reset will bring network settings back to default

and lose all remote network connections.

Select Load Factory Setting Except Network Configuration from the System Utility menu,

then the following screen page shows up.

Click the “OK” button to restore the Managed Switch back to the defaults excluding network

configurations.

3.7 Save Configuration

In order to save configuration settings permanently, users need to save configuration first

before resetting the Managed Switch. Select Save Configuration from the Main Menu and

then the following screen page appears.

Click the “OK” button to save changes or running configurations to Flash.