User`s manual

56
7. IGMP Snooping: Set up IGMP Snooping function.
8. Loop Detection: Enable or disable Loop Detection function.
9. Filter Configuration: Set up DHCP snooping and DHCP server trust ports.
3.4.1 Switch Configuration
Click the option Switch Configuration from the Switch Management menu and then the
following screen page appears.
MAC Address Aging Time: Set up MAC Address aging time manually. Entries in the MAC
address table containing source MAC addresses and their associated ports will be deleted if
they are not accessed within the aging time.
SFP Polling: Enable or disable SFP Polling.
Statistics Polling: Enable or disable Statistics Polling.
Click the “OK” button to apply the settings.
3.4.2 Storm Control
Click the option Storm Control from the Switch Management menu and then the following
screen page appears.
Storm Protection: Enable or disable Storm Protection function.