User`s manual

50
3.3 Network Management
In order to enable network management of the Managed Switch, proper network configuration
is required. To do this, click the folder Network Management from the left column and then
the following screen page appears.
1. Network Configuration: Set up the required IP configuration of the Managed Switch.
2. System Service Configuration: Set up the system service type.
3. Time Server Configuration: Set up the time server‟s configuration.
4. Device Community: View the registered SNMP community name list. Add a new
community name or remove an existing community name.
5. Trap Destination: View the registered SNMP trap destination list.
6. Trap Configuration: Set up which type of trap is sent when a certain situation occurs.
3.3.1 Network Configuration
Click the option Network Configuration from the Network Management menu and then the
following screen page appears.
MAC Address: This view-only field shows the unique and permanent MAC address pre-
assigned to the Managed Switch. You cannot change the Managed Switch‟s MAC address.