User`s manual

49
Current/Total/Max Users: View-only field.
Current: This shows the number of current registered user.
Total: This shows the total number of the registered users.
Max: This shows the maximum number available for registration. The maximum
number is 3.
Account State: Enable or disable the selected account.
User Name: Specify the authorized user login name, up to 20 alphanumeric characters.
Password: Enter the desired user password, up to 20 alphanumeric characters.
Retype Password: Enter the password again to confirm.
Description: Enter a unique description up to 35 alphanumeric characters for this user. This
is mainly for reference only.
Console Level: Select the preferred access level for this newly created account.
Administrator: Full access right, including maintaining user account, system
information, loading factory settings, etc..
Read & Write: Partial access right, unable to modify system information, user account,
load factory settings and upgrade firmware.
Read Only: Read only access right.
NOTE: If you forget the login password, the only way to gain access to the Web Management is to
set the Managed Switch back to the factory default setting by pressing the Reset button for 10
seconds (The Reset button is located on the Right Panel of the Managed Switch.). When the
Managed Switch returns back to the default setting, you can login with the default login username
and password (By default, no password is required. Leave the field empty and then press Login.)
Click the “OK” button to apply the settings.