User`s manual

48
1000M Port Number: The number of ports transmitting at the speed of 1000Mbps
100M Port Number: The number of ports transmitting at the speed of 100Mbps
M/B Version: View-only field that shows the main board version.
Fiber 1 Type: View-only field that shows information about the slide-in or fixed fiber type.
Fiber 1 Vendor: View-only field that shows the vendor of the slide-in or fixed fiber.
Fiber 1 PN: View-only field that shows the PN of the slide-in or fixed fiber.
Serial Number: View-only field that shows the serial number of this switch.
Date Code: View-only field that shows the Managed Switch firmware date code.
Up time: View-only field that shows how long the device has been powered on.
Local Time: View-only field that shows the time of the location where the switch is.
CATV Module- RF TV State: View-only field that shows whether RF TV is ready or not.
CATV Module- RF TV Output: Turn on or off the RF TV Output.
Click the “OK” button to apply the modifications.
3.2 User Authentication
To prevent any un-authorized operation, only registered users are allowed to operate the
Managed Switch. Users who want to operate the Managed Switch need to register into the
user‟s list first.
To view or change current registered users, select User Authentication from the left column
and then the following screen page shows up.
Click New to add a new user account, then the following screen page appears.
Click Edit to view and edit a registered user setting.
Click Delete to remove a registered user setting.